|
The AS0840 series of solid
state power amplifiers follows the MILMEGA tradition
for compact, upgradeable microwave
power amplifier solutions with field proven reliability.
Developed to cover the frequency band of 0.8 GHz to
4GHz in two bands (0.8 GHz to 2GHz and 2GHz to 4GHz),
the topology has significant advantages over single
band solutions.
| • |
The power is configurable
in both bands to match the needs of the customer.
If, for example, you require 100 W from 0.8 to 2GHz
and 55 W from 2-4GHz, then that is what you buy.
If at a later stage you require more power in either
band, then MILMEGA can add the appropriate modules
at that point, protecting your investment by extending
the life of your asset. Buy the power you need,
when you need it. |
| • |
Higher powers are achievable in each band section than are possible with a single band solution. In addition power peaking can be achieved in both bands, for example in each of the common radar bands. |
| • |
Because the dual band solution is like
having two tuned filters, the harmonic performance
is vastly superior to that offered by a single band
solution. |
| • |
Because with the dual band solution only
one band is used at a time, the efficiency of the
amplifier is greater. In addition a smaller power
supply can be used, enhancing the reliability compared
to a single band solution. |
Continue
to Power Amplifier Dual Band products >>
|
|
 |
